In the architectural decoration and stone processing industry, professionals often face several cutting - related challenges. Low cutting efficiency is a significant issue. For example, traditional saw blades may take up to 30% more time to cut through a standard block of granite compared to more advanced tools. This not only slows down the overall project progress but also increases labor costs.
Another pain point is rapid tool wear. Regular saw blades can lose their sharpness after just 50 - 100 cuts on hard stones like granite, which means frequent blade replacements. Moreover, the operation noise and safety problems associated with traditional saws are also concerning. High - decibel noise can cause hearing damage to operators, and the lack of proper safety features may lead to accidents.
The UHD Super - Hard 400H brazed diamond saw blade addresses these issues with its advanced technology. The brazing technology used in this saw blade is a game - changer. It ensures a stronger bond between the diamond particles and the blade base. With this technology, the diamond particles are evenly distributed across the blade surface, which means a more consistent cutting performance.
The high - quality diamond particles used in the UHD 400H are carefully selected. They are larger and more durable than those in ordinary saw blades. Tests show that these diamond particles can withstand up to 20% more pressure during cutting, reducing the risk of breakage and wear. The optimized heat dissipation and shock - absorption design also contribute to the performance improvement. The heat generated during cutting can be quickly dissipated, preventing the blade from overheating and extending its service life. The shock - absorption design reduces the vibration during operation, which not only improves the cutting accuracy but also reduces the noise level by up to 15%.
The UHD Super - Hard 400H saw blade is suitable for both wet and dry cutting scenarios. In wet cutting, the blade can achieve a smoother cut and better cooling effect, which is ideal for large - scale stone processing. In dry cutting, it offers more flexibility and is suitable for on - site construction where water supply may be limited.
| Stone Type | Cutting Speed (m/min) | Feed Rate (mm/min) |
|---|---|---|
| Marble | 20 - 30 | 100 - 200 |
| Granite | 15 - 25 | 80 - 150 |
| Artificial Quartz Stone | 25 - 35 | 120 - 220 |
Proper maintenance and installation are crucial for the performance and longevity of the UHD Super - Hard 400H saw blade. After each use, the blade should be cleaned with a soft brush to remove any stone debris. It is also recommended to store the blade in a dry and cool place to prevent rusting. When installing the blade, make sure it is centered correctly on the saw arbor to avoid uneven cutting and excessive vibration.
Some common mistakes to avoid include using the wrong blade for a specific stone type and over - tightening the blade during installation. These mistakes can not only damage the blade but also pose safety risks.
Many customers have reported significant benefits after using the UHD Super - Hard 400H saw blade. One customer in a large - scale stone processing factory said that the blade's service life was 50% longer than the previous saw blades they used. Another customer mentioned that the vibration during cutting was reduced by 20%, which made the operation much more comfortable and safer.
To learn more about efficient cutting solutions and download the application manual, please visit CTA - URL.
.png?x-oss-process=image/resize,h_600,m_lfit/format,webp)
.png?x-oss-process=image/resize,h_600,m_lfit/format,webp)
